With all the 12 channels of the AlbaCombi almost any configuration can be achieved, all 12 channels have a wide input range of 0 to 32V, and 6 of those can be configured as resistive, 0 to 3000 ohms.
Those readings can be configured to be any engine reading and even binary inputs for alarms that can be later used for creating NMEA2000 PGNS. Even for the 3 wire gauges, one channel can be configured as “voltage correction” in order to compensate for the variations of the readings due to voltage increase or decrease.
Things as 0 to 20mA can be easily achieved just by using a 250ohms resistor and configuring the channel as 1 to 5V input and creating the corresponding calibration table.
To simplify calibration, a pre-set number of calibration tables are stored on the unit.
